3/8 UNC HUB STUDS For TRIUMPH IRS TRAILING ARMS

3/8 UNC HUB STUDS

Engineering Improvement to Classic Cars

A well known and long standing solution to Hub Studs pulling out of the alloy trailing arm

WITH A DIFFERENCE!

The only problem with the hub studs is the fine 5/16 unf thread stripping the thread in the alloy trailing arm. The strength of the stud is very adequate. So these studs from Classic Driving Development are 3/8 unc thread into the alloy and 5/16 unf into the hub carrier and the brake back plate, saves a lot of work!

 

Made from Hi Tensile Steel they come as a car set (12 off) with washers and nyloc nuts

GRIP  or  GRIPE ?   YOUR CHOICE !

 
3/8 UNC HUB STUDS TRIUMPH IRS3/8 UNC HUB STUDS TRIUMPH IRS