STAG

CDD products for the Triumph Stag

 

3/8 UNC HUB STUD

 

3/8 UNC HUB STUDS

For

TRIUMPH  IRS  TRAILING ARMS

                                                                                                              A well known and long standing solution to Hub Studs pulling out of the alloy trailing arm

WITH A DIFFERENCE ! 

The only problem with the hub studs is the fine 5/16 unf thread stripping the thread in the alloy trailing arm. The strength of the stud is very adequate. So these studs from Classic Driving Development are 3/8 unc thread into the alloy and 5/16 unf into the hub carrier and the brake back plate, saves a lot of work ! 

Made from Hi Tensile Steel they come as a car set (12 off) with washers and nyloc nuts

3/8 UNC HUB STUDS For TRIUMPH  IRS  TRAILING ARMS3/8 UNC HUB STUDS For TRIUMPH IRS TRAILING ARMS